|
EPOXY LINING
|
|
|
PRODUCT NUMBER |
1040 (EP-18-1) |
|
TYPE |
A two pack, anti-corrosive paint based on epoxy resin and special hardener with acid and alkali resistant pigments. |
|
USES |
Used for the lining of cement or steel drainpipes and the surface of steel or cement to resist acids and alkalis. |
|
CHARACTERISTICS |
1. Excellent resistance to water, sea water and industrial sewage. 2. Excellent resistance to mechanical damage. 3. Excellent resistance to oils, chemicals and corrosion. 4. Hard, smooth film and good adhesion. 5. 300μfilm can be obtained by one coat spray, and no sagging and saving man-hour. |
|
FINISH |
Gloss |
|
COLOR |
Light and dark grey |
|
HIDING POWER |
Above 15 ㎡/L (mixture) |
|
MASS DENSITY |
Above 1.35 Kg/L (mixture) |
|
VISCOSITY |
Paste (mixture, 30℃) |
|
DRYING TIME |
Set-to-touch 2 hrs. Dry hard 8 hrs. Fully Cured 7 days (25℃) |
| OPTIMUM FILM THICKNESS | Wet 325
microns Dry 300 microns |
| THEORETICAL COVERAGE | 2.0 ㎡/Kg 3.0 ㎡/L |
| OVERCOATING INTERVALS | Min. 6 hrs. Max. 3 days (25℃) |
|
APPLYING COATING LAYERS |
3 coats |
|
MIXING RATIO |
Base : hardener = 77.5 : 22.5 (by wt.) |
|
POT LIFE |
30 minutes (mixture, 25℃) |
|
THINNER |
No.1005 Epoxy Thinner (SP-12) |
|
PRECEDING COATS |
No.1073 Epoxy Clear Cement Primer |
| NON-VOLATILE CONTENT | Above 95%（mixture） |
|
STORAGE SHELF LIFE |
Minimum 1 year under normal storage conditions. |
|
APPLICATION METHOD |
Brush (only for small areas repairing), Airless spray, Roller |
|
NOTE |
1. Mix base and hardener according to the mixing ratio and stir thoroughly. 2. Adhered moisture, grease, and dirt on substrate must be cleaned thoroughly. 3. The paint film exposed to the sun for a long-term does have yellowing phenomenon that is without affect the quality of paint film. 4. All equipment must be cleaned immediately after use. 5. Avoid applying the paint in rainy weather or humidity above 85% RH, particularly a wet surface must be thoroughly dried. 6. When used inside tanks, sufficient ventilation must be provided. 7. When overcoating interval is exceeded, paint surface must be roughened to ensure adhesion. |
|
|
|
|
 |
|
|
|
