|
EPOXY PUTTY |
|
|
PRODUCT NUMBER |
1003 (EP-14 ) |
|
TYPE |
A two-pack, solvent-less putty based on solvent-less epoxy resin and hardener with titanium dioxide and filler. |
|
USES |
Used for cement products, machinery and FRP to fill small cavities and cracks. |
|
CHARACTERISTICS |
1. Tough and hard film with very good adhesion. 2. Minimal shrinkage after drying, no pinhole, and once is complete. 3. Excellent resistance to abrasion and impact. 4. Excellent resistance to water, alkalis and solvents. |
|
COLOR |
Light yellow ( base: white, hardener: yellow) |
|
HIDING POWER |
Above 5.0 ㎡/L (mixture) |
|
VISCOSITY |
Paste (mixture, 25℃) |
|
DRYING TIME |
Set-to-touch 1 hr. Dry hard 4 hrs. Fully cured 7days (25℃) |
|
OVERCOATING INTERVALS |
Min. 4 hrs. Max. 5 days (25℃) |
|
MIXING RATIO |
Base : hardener = 50 : 50 (by wt.) |
|
NON-VOLATILE CONTENT |
100% (mixture) |
|
POT LIFE |
10 minutes for 1kg of mixture (25℃) |
|
HEAT RESISTANCE |
Continuous 93℃ Intermittent 121℃ |
|
THINNER |
No.1005 Epoxy Thinner (SP-12) (Only for cleaning tools) |
|
THINNING RATE |
Never blend in thinner |
|
STORAGE SHELF LIFE |
Minimum 1 year under normal storage conditions. |
|
APPLICATION METHOD |
Manual troweling |
|
NOTE |
1. Mix base and hardener according to the mixing ratio and stir thoroughly |
2. Avoid applying the paint in rainy weather or relative humidity exceeded 85%, particularly a wet surface must be thoroughly dried.
All
equipment must be cleaned immediately after use
|
|
|
|
 |
|
|
|
