|
GRAY SURFACER
|
|
|
PRODUCT NUMBER |
903 |
|
TYPE |
Middle primer based on phenolic resin and dried oil with high quality rust resistant pigment. |
|
USES |
Used for vehicles and mechanical facilities. |
|
CHARACTERISTICS |
1. Fast drying. 2. Very good adhesion and abrasion resistance. 3. Excellent adhesion with topcoat, do not wrinkle due to spray lacquer. |
|
FINISH |
Flat |
|
COLOR |
Gray |
|
HIDING POWER |
Above 10 m2/L |
|
MASS DENSITY |
Above 1.3 Kg/L |
|
VISCOSITY |
80~100 KU (25℃ |
|
DRYING TIME |
Set-to-touch 15 minutes Dry hard 2 hrs.
(25℃ |
| OPTIMUM FILM THICKNESS | Wet 80 microns Dry 40 microns |
| THEORETICAL COVERAGE | 47.3 m2 /Gal 12.5m2/L 9.6 m2/Kg |
| OVERCOATING INTERVALS | Min. 3 hrs. (25 ℃) |
| NON-VOLATILE CONTENT | Above 60% |
| THINNER | No.805 Paint Thinner  OM-07  |
| THINNING RATE | 5~10%  cleaning for tools not included  |
| SUBSEQUENT COATS | Ready-Mixed Paints, Synthetic Enamels |
| PRECEDING COATS | No.902 Red Oxide Primer |
| STORAGE SHELF LIFE | Minimum 1 year under normal storage conditions. |
| APPLICATION METHOD | Spray, Brush |
| NOTE | 1. Before application, stir paint evenly, and when paint is too thick, thinner within specified quantity can be added. 2. Adhered moisture, grease, dirt, damaged or loose old paint and corrosive salts on substrate must be cleaned thoroughly. 3. Avoid applying the paint in
rainy, humid weather or substrate temperature excessively high to 40℃ |
) 
) 
or low to 10℃
. 
|
|
|
|
 |
|
|
|
