|TOPLONG CLEAR (SILICONE ACRYLIC)|
|TYPE||Two-pack, clear paint based on special resin and hardener.|
|USES||Used for vehicles, aluminum alloy, building external wall and metal products to have a beautiful appearance.|
1. Use non-toxic silicone resin, excellent weather and chemical resistance.
2. Durability as well as fluorine resin.
3. Excellent pollution resistance.
4. High gloss with excellent adhesion.
|FINISH||Gloss or flat|
|FLASH POINT||Above 20℃ (68℉)|
|MASS DENSITY||Above 0.95 Kg/L mixture|
|VISCOSITY||50 ~ 60 KU mixture, 25 ℃|
|DRYING TIME||Set-to-touch 1/2 hr. Dry hard 6 hrs. Fully cured 7 days (25℃)|
|OPTIMUM FILM THICKNESS||Wet 50 microns Dry 25 microns|
|THEORETICAL COVERAGE||75.7 m2 /Gal 20 m2 / L 20 m2 /Kg|
|OVERCOATING INTERVALS||Min. 4 hrs. Max. 5 days (25℃)|
|MIXING RATIO||Base : Hardener = 84 : 16|
|NON-VOLATILE CONTENT||Above 45% mixture|
|POT LIFE||4 hrs. mixture|
|THINNER||No. T-200S Toplong Thinner|
|PRECEDING COATS||T-200F Toplong Coating (Silicone Acrylic)|
|STORAGE SHELF LIFE|
Minimum 6 months under normal storage conditions.
|APPLICATION METHOD||Airless Spray or Air Spray ( If apply by hand brush, the defoamer have to be added, or to order hand brush type of product. )|
|FOR AIRLESS SPRAY|
Tip Size Graco 315, 617
Air Pressure 3 ~ 6 Kg/cm2
Pump Ratio 28 1 or greater
|NOTE||1. Mix base
and hardener according to the mixing ratio and stir thoroughly before use.|
2. Avoid applying the paint in rainy or humid weather, and particularly, a wet surface must be thoroughly dried.
3. All equipments must be cleaned immediately after use.
4. When used inside tanks, sufficient ventilation must be provided.
5. The hand brush type’s product can also be applied by the roller, but due to if thickness of paint film is too thick, the small bubbles are easily generated, must pay particular attention to.
6. Please refer to the application examples about the painting system or connect with our technical department.