EPOXY GLASS FLAKE ABRASION RESISTANT PAINT
|
PRODUCT NUMBER |
1074 (EP-150) |
|
TYPE |
A two-pack, high performance rust preventive paint based on epoxy resins and hardener with glass flakes. |
|
USES |
Used for the steel structures of bridge, water canal, plant facility, storage tank. |
|
CHARACTERISTICS |
1. Tough and hard film with very good adhesion. 2. Excellent resistance to water and seawater. 3. Very good oils resistance. 4. Excellent rust preventive properties. 5. Excellent resistance to mechanical damage. 6. Very good resistance to ultraviolet ray penetration. |
|
FINISH |
Gloss |
|
COLOR |
Gray、Brown |
|
HIDING POWER |
Above 10 ㎡/L (mixture) |
|
MASS DENSITY |
Above 1.4 Kg/L (mixture) |
|
VISCOSITY |
80~110 KU (mixture, 25℃) |
|
DRYING TIME |
Set-to-touch 1 hr. Dry hard 4 hrs. Fully cured 7 days. (25℃) |
|
OPTIMUM FILM THICKNESS |
Wet 416 microns Dry 300 microns |
|
THEORETICAL COVERAGE |
9.0 ㎡/Gal 2.4 ㎡/L 1.7 ㎡/Kg |
|
OVERCOATING INTERVALS |
Min. 8 hrs. Max. 14 days (20℃) |
|
MIXING RATIO |
Base : Hardener =90 : 10 (by wt.) |
|
NON-VOLATILE CONTENT |
Above 50% (mixture) |
|
POT LIFE |
50 minutes (mixture, 25℃) |
|
THINNER |
No.1005 Epoxy Thinner (SP-12) |
|
THINNING RATE |
5~10% (cleaning tools excluded) |
|
PRECEDING COATS |
No.1011 Inorganic Zinc Rich Primer or Epoxy system |
|
SUBSEQUENT COATS |
Epoxy, Vinyl, CR or PU system |
|
STORAGE SHELF LIFE |
Minimum 1 year under normal storage conditions. |
|
APPLICATION METHOD |
Airless Spray, Brush |
|
NOTE |
1. Mix base and hardener according to the mixing ratio and stir thoroughly then keep static about 10~20 minutes before use. 2. Adhered moisture, grease, dirt, dust, rust and corrosion salts on substrate must be removed thoroughly. 3. Avoid applying the paint in rainy weather or relative humidity exceeded 85%, particularly a wet surface must be thoroughly dried. 4. All equipment must be cleaned immediately after use. 5. When used inside tanks, sufficient ventilation must be provided. |
|
|
|
|
 |
|
|
|
