C.R. ALUMINUM TRIPOLYPHOSPHATE PRIMER
| PRODUCT NUMBER | No.1457 |
| TYPE | The anti-corrosive paint based on Chlorinated Rubber with Iron Oxide and Aluminum Tripolyphosphate non-pollution pigment. |
| USES | Excellent non-pollution anti-corrosive under coat for exterior weathering and interior steel parts. |
| CHARACTERISTICS | 1. Very
fast drying. 2. Excellent coupling force and anti-corrosion. 3. Very good adhesion and weather resistance. 4. Very good resistance to mechanical damage. 5. Very good resistance to oil and seawater. |
| APPLICATION METHOD | Brush, Roller, Airless Spray. |
| COLOR | Brown, white or Grey |
| FINISH | Flat |
| HOLDING POWER | Above 8 m2/L |
| FLASH POINT | Above 26℃ (80℉) |
| SPECIFIC GRAVITY | Above 1.1 kg/L |
| VISCOSITY | 70-90
KU (25 ℃) |
| BANDING TEST | 6m/m |
| SALT WATER TEST | NaCl(3%) for 144 hrs. |
DRYING
TIME (25℃ ) | Set-to-touch 1/2 hr. Dry hard 3 hrs. |
| OVERCOATING INTERVALS | Min. 4 hrs. (25 ℃) |
| OPTIMUM FILM THICKNESS | Wet 95 microns Dry 40 microns |
| VOLUME SOLIDS | Above 55% |
| THEORETICAL COVERAGE | 10.5 m2/L
9.5  m2/KG 40  m2/GL |
| THINNER | RP-71 PCR Thinner |
| THINNING RATE | 0-5% (by wt.) |
| SUBSEQUENT COATS | Chlorinated Rubber or Oleoresins topcoats. |
| STORAGE SHELF LIFE | Minimum 1 year under normal storage conditions. |
| FOR AIRLESS SPRAY | Tip Size Graco 719, 721 Air Pressure 4 Pump Ratio 45 : 1 or 30 : 1 |
| NOTE | 1. Before
application, stir paint evenly. When paint is too thick, thinner can be added
within specified quantity 2. Moisture, grease, rust, dirt and loose paints film on substrate must be removed, so are the corrosive salt particles. As a result, paint performance can be ensured. 3. Application
should avoid the following environment: rainy day; substrate is damp by dew;
temperature is above 40 |
6 KG/
C 
℃ or below 10℃
. 
|
|
|
|
 |
|
|
|
