RAINBOW CHLOR RUBBER FINISH
| PRODUCT NUMBER |
No.1401/1404/1405/1406/1451/1456(RF-51~56) |
|
TYPE |
Finish paint based Chlorinated Rubber and special resins with weather and chemical resistant pigments. |
|
USES |
Heavy duty topcoat for steel structures of power plants chemical factories, ships, bridges and tanks, ect. |
|
CHARACTERISTICS |
1.Very fast drying. 2.Good resistance to mechanical damage with very good adhesion. 3.Good resistance to oil, acids, and alkalis. 4.Very good resistance to weathering and water. 5.Easy application. |
|
APPLICATION METHOD |
Airless Spray, Brush, Roller. |
|
COLOR |
White and desired colors |
|
GLOSS |
20~65% |
|
HILDING POWER |
Above
8 m2 |
|
SPECIFIC GRAVITY |
Above 1.1 kg/L |
| VISCOSITY | 70-90 KU
(25 ℃) |
| BANDING TEST | 6m/m |
/L |
SALT WATER TEST |
NaCl(3%) for 72 hrs. |
|
|
ACID WATER TEST |
H2SO4(5%) for 24 hrs. : H2SO4(30%)for 6 hrs. |
|
|
ALKALIS WATER TEST |
NaOH(30%) for 6 hrs. |
|
|
WATER TEST |
For 48 hrs. |
|
|
DRYING TIME (25 |
Set-to-touch 1 hr. Dry hard 6 hrs. |
|
|
OVERCOATING INTERVALS |
|
Min. 4 hrs. (25℃ |
|
OPTIMUM FILM THICKNESS |
Wet 110 microns Dry 40 microns |
|
|
VOLUME SOLIDS |
Above 45% |
|
| THEORETICAL COVERAGE | 9.0 m2/L
8.2 m2/KG 34.0  m2/GL |
|
| THINNER | RP-71 PCR Thinner | |
| THINNING RATE | 5-15% (by wt.) |
) 
)|
PRECEDING COATS |
No.1402/1403/1449/1450/1452/1011/1006/1009 |
|
STORAGE SHELF LIFE |
Minimum 1 year under normal storage conditions. |
|
NOTE |
1.Before application, stir paint evenly, and when paint is too thick, CR thinner within specified quantity can be added. 2.Adhered moisture, grease, dirt, damaged or loose old paint and corrosive salts on substrate must be cleaned thoroughly. 3.When substrate is damp with dew or during rainy weather, painting must be suspended. 4.For heavy duty chemical resistant applications two coats of both primer and topcoat must be coated to insure effective resistance to acids and alkalis. 5.Adhered moisture, grease, dirt, damaged or loose old paint and corrosive salts on substrate must be cleaned thoroughly. 6.When substrate is damp with dew or during rainy weather, painting must be suspended. 7.For heavy duty chemical resistant applications two coats of both primer and topcoat must be coated to insure effective resistance to acids and alkalis. 8.The mist coat is needed when using No.1011 for primer. |
|
|
|
|
 |
|
|
|
