910 RED OXIDE SURFACER, GENERAL PURPOSE

RED OXIDE SURFACER, GENERAL PURPOSE

PRODUCT NUMBER

910

TYPE

Lower cost rust prevention primer based on phenolic resin and special resin with iron oxide pigment.

USES

Used for vehicles and mechanical facilities for a large quantity use.

CHARACTERISTICS

1. Very fast drying.

2. Excellent resistance to adhesion and abrasion.

3. Good rust resistance.

4. Relatively low cost.

FINISH

Flat

COLOR

Red

HIDING POWER

Above 12.5 m2/L

MASS DENSITY

Above 1.3 Kg/L

VISCOSITY

80~100 KU (25℃)

DRYING TIME

Set-to-touch 15 minutes

Dry hard 2 hrs. (25℃)


OPTIMUM FILM THICKNESS

Wet 90 microns

Dry 40 microns

THEORETICAL COVERAGE

42.0 m2/Gal 11.1 m2/L 8.2 m2/Kg

OVERCOATING INTERVALS

Min. 3 hrs.

NON-VOLATILE CONTENT

Above 65%

THINNER No.805 Paint ThinnerOM-07
THINNING RATE 5~10% cleaning for tools not included
PRECEDING COATS No.908 Wash PrimerSP-01/02

SUBSEQUENT COATS

No.903 Gray Surfacer, Ready-Mixed Paints, Synthetic Enamels, Hammer Tone Paints

STORAGE SHELF LIFE

Minimum 1 year under normal storage conditions.

APPLICATION METHOD

Spray, Brush, Roller

NOTE

1. Before application, stir paint evenly, and when paint is too thick, thinner within specified quantity can be added.

2. Adhered moisture, grease, dirt, damaged or loose old paint and corrosive salts on substrate must be cleaned thoroughly.

3. Avoid applying the paint in rainy, humid weather or substrate temperature excessively high to 40℃ or low to 10℃.

4. Avoid applying to insufficient drying of previous paint coat.