|
SOLVENTLESS EPOXY ELASTOMER COATING |
|
|
PRODUCT NUMBER |
No.1080 |
|
TYPE |
Two pack, elastic and long able solvent-less coating based on special solvent-less Epoxy-Polyurethane Resin and Hardener with chemicals resistant pigments. |
|
USES |
For concrete or steel structure of bridges, wall, roof and pipes etc. to prevent corrosion and leak. |
|
CHARACTERISTICS |
1.Excellent resistance to oils, water, chemicals and corrosion. 2. Paint film with elasticity and elongation can stand concrete’s cracking caused by the heat expansion. 3. Excellent adhesion on the surface of steel and concrete. 4. 200 microns pinhole-less film with one coat, seamless and impermeable. 5. Excellent resistance to mechanical damage and electronic insulation. |
|
GLOSS |
Above 80% |
|
COLOR |
Gray |
|
HIDING POWER |
Above 5 m2/L |
|
WEIGHT |
1.2 kg/L (Mixer) |
|
VISCOSITY (25 ℃) |
(25 ℃) |
|
DRYING TIME (25 ℃) |
Set-to-touch 6hr. Dry hard 24 hrs Full Dry 7days |
|
OPTIMUM FILM THICKNESS |
Wet 375μ（microns） Dry 350μ（microns） |
|
OVERCOATING INTERVALS (25℃) |
Min. 24 hrs. Max. 2 days (20 ℃) |
|
THEORETICAL COVERAGE |
10.0 ㎡/Gal |
|
NON-VOLATILE CONTENT |
Above 95％ (Mixer) Above 10% (Mixer) |
|
POT LIFE |
1hr. (25 ℃) |
|
THINNER |
No.1005 |
|
PRECEDING COATS |
No.1073 |
|
SUBSEQUENT COATS |
UP-04 |
|
STORAGE SHELF LIFE |
Minimum 1 year under normal storage conditions. |
|
APPLICATION METHOD |
Airless Spray, Brush. |
|
NOTE |
1. Mix base, hardener and zinc dust according to mixing ratio and stir thoroughly. 2. Adhered moisture, grease, dirt, rust and corrosive salts on substrate must be cleaned thoroughly. 3. Avoid applying the paint in rainy weather or humidity above 85% RH, particularly, a wet surface must be thoroughly dried. 4. When overcoating interval is exceeded, paint surface must be roughened to insure adhesion. 5. All equipments must be cleaned immediately after use. |
|
|
|
|
 |
|
|
|
