|
EOPXY MORTAR PUTTY |
|
|
PRODUCT NUMBER |
1026 |
|
TYPE |
Three pack, solvent-less mortar putty based on epoxy resin, hardener, and fillers. |
|
USES |
Used for the sealing of the cement products and mortar ground. |
|
CHARACTERISTICS |
1. Excellent applicability, pinhole-less thin film with one coat. 2. Excellent adhesion with small shrinkage. 3. Very good resistance to wear, alkalis and solvents. 4. Excellent mechanical and physical properties. |
|
COLOR |
Natural colors |
|
DENSITY |
Above 1.1 Kg/L （mixture） |
|
VISCOSITY |
Paste（mixture） |
|
DRYING TIME |
Set-to-touch 6 hrs. Dry hard 12 hrs. Full cured 7 days (25 ℃) |
|
OPTIMUM FILM THICKNESS |
100 microns |
|
OVERCOATING INTERVALS |
Min. 8 hrs. (25 ℃) |
|
THEORETICAL COVERAGE |
1.1 Kg/m2 |
|
MIXING RATIO |
Base : Hardener : Powder = 40 : 20 : 40 ( by wt. ) |
|
POT LIFE |
30 minutes（mixture, 25℃） |
|
THINNER |
No.1005 Epoxy Thinner（SP-12）（cleaning tools only） |
|
THINNING RATE |
Don’t add. |
|
SUBSEQUENT COATS |
No.1001 Epoxy Topcoat （EP-04） |
|
No.1015 Epoxy Coating, Solventless |
|
|
STORAGE SHELF LIFE |
Minimum 1 year under normal storage conditions. |
|
APPLICATION METHOD |
Trowel |
|
NOTE |
1. Evenly mix base and hardener according to the mixing ratio then blend the fillers thoroughly. 2. Avoid applying the paint in rainy weather or relative humidity exceeded 85% RH. 3. Don’t apply the putty before curing of the mortar, and when applying, a wet surface must be thoroughly dried. 4. Please wear gloves to avoid touching skin when applying. |
|
|
|
|
 |
|
|
|
